On Mondays, we have a social in the guild studio. I think some guilds call it open studio days. Because it is summer I usually go in around noon. I thought this would be a good time to do my visor cover. Jan can take some pictures too and all will be happy and bright. So naturally………
I packed my rolling mat, plastic, bucket, spray ball, rubbing tool, and wool but I forgot to ball of pencil roving. This is essential if I am going to try Ildie’s method of making the design with wet wool.
The forgotten ball
The best laid plans of mice and men often go awry. I am not a Mouse or a man so I had a look through the donated yarns and found one that was not too thin or tightly spun
This is as far as I got before I gave up. Yarn is not a good choice. It has too much structure so it doesn’t want to stay where you put it.
Besides learning that yarn is not good for this I also decided I had made the design too small. It will be very fiddly to add the colour.
Now I am back in the studio with all my supplies. All but one of the colours is Corriedale. One is Merino. the grey bat is unknown. I would say a medium wool and it is a short fiber. I sized my template for 30% shrinkage. you can get 30% out of most fibers. And why do a sample when you can live life dangerously?
The pencil roving was much easier to use to outline the designs. I wet it with soapy water and it stayed where I put it. The yarn had too many ideas of its own. I just did them freehand using the template to keep my design inside the lines.
Next was adding the colour. I got better as I went along. the first colours that have to be completely within the lines but right up to them is the hardest. When you add a colour next to another colour you can overlap and no one will see it. It will be between the other colour and the backing. Thinking upside down is a hard thing to do. you feel like you should say inside the lines. although I didn’t mess up the design lines I kept smudging the outside line. next time I will add them at the end.
I added the bat to the back. it was quite thin so I did 2 layers, one in each direction. and made nice straight lines, not that they will stay that way.
I rubbed this side first and then flipped it over. Doesn’t it look pretty all wet and bright under the plastic? Once I flipped it I was pleasantly surprised the sheep was on the right. Which, if you think about it, makes sense but when I was adding it I was thinking I wish I had left more space for it on the right. So that was a good thing.
I rubbed this longer than I usually do because I wanted the design to set well and stay put. I had no problem with it moving. boarder was another matter. it was constantly moving. I would lift the plastic and fix it. Then rub carefully and then it would move. In the end, I put it back where it should be and thought if it doesn’t stick, I will just needle felt it in place.
It moved a little while rolling but for the most part, it stayed put so I was quite happy. I rolled it a lot to get it to shrink. Whatever the bat is it makes a sturdy felt but does not shrink as much as Corriedale. I rinsed it with hot water and rolled it more, and more and when it wouldn’t budge anymore, I stopped. It got close but not quite there. I am sure it will still work but I haven’t checked yet.
It needs to be shaved to bring the colours back up and ironed to block it. I haven’t decided if I will add any stitching or beads. but I am out of time for now